Activity for IAXmodem

IAXmodem released /iaxmodem/iaxmodem-1.3.5.tar.gz

IAXmodem — Sun, 18 Jan 2026 23:08:02 -0000

Lee Howard committed [r84] on Code

Lee Howard — Sun, 18 Jan 2026 23:01:59 -0000

Bump - 1.3.5

Lee Howard committed [r83] on Code

Lee Howard — Thu, 15 May 2025 22:05:34 -0000

Unfortunately, some carriers will sometimes just do a normal hangup and only gave silence (no ringback or otherwise) when it was really a busy or no answer condition.

Lee Howard committed [r82] on Code

Lee Howard — Sun, 23 Mar 2025 20:45:14 -0000

Refactor the tone detector approach, especially for ringback, and add detection for special information tones (SITs).

Lee Howard committed [r81] on Code

Lee Howard — Tue, 18 Mar 2025 15:23:24 -0000

Fix the tone counting.

Lee Howard committed [r80] on Code

Lee Howard — Tue, 18 Mar 2025 01:04:11 -0000

Avoid catching inbound calls... and do it better for outbound.

Lee Howard committed [r79] on Code

Lee Howard — Mon, 17 Mar 2025 22:34:27 -0000

Add a second super_tone detector for ringback detection.

Lee Howard committed [r78] on Code

Lee Howard — Mon, 17 Mar 2025 04:23:44 -0000

Prevent runaway skew.

Lee Howard committed [r77] on Code

Lee Howard — Sun, 16 Mar 2025 05:26:46 -0000

Correct the previous change.

Lee Howard committed [r76] on Code

Lee Howard — Sun, 16 Mar 2025 05:06:27 -0000

If no samples have come from the remote to us, then they haven't actually answered yet.

Lee Howard committed [r75] on Code

Lee Howard — Sat, 15 Mar 2025 00:40:43 -0000

Add in-band busy and congestion tones detection.

Lee Howard committed [r74] on Code

Lee Howard — Fri, 07 Mar 2025 18:03:41 -0000

Extend full duplex adaptive receive capability for modems:

Lee Howard committed [r73] on Code

Lee Howard — Thu, 06 Mar 2025 06:18:11 -0000

Cope with fill data jitter, also.

Lee Howard committed [r72] on Code

Lee Howard — Mon, 03 Mar 2025 01:57:51 -0000

Further improve jitter mitigation.

Lee Howard committed [r71] on Code

Lee Howard — Sun, 02 Mar 2025 04:42:30 -0000

I'm seeing a sender that uses inconsistent and out-of-spec periods of silence between DCS and TCF - anywhere from 275 samples to above 360 samples. Try to cope without sacrificing much.

Lee Howard committed [r70] on Code

Lee Howard — Fri, 28 Feb 2025 20:00:23 -0000

A few things...

Lee Howard committed [r69] on Code

Lee Howard — Fri, 28 Feb 2025 18:10:47 -0000

Further refactoring of the code for jitter detection.

Lee Howard committed [r68] on Code

Lee Howard — Fri, 21 Feb 2025 19:06:18 -0000

We're back to doing this.

Lee Howard committed [r67] on Code

Lee Howard — Fri, 21 Feb 2025 04:27:41 -0000

Adds the +FAR=2 feature to enable the reception of V.21 HDLC frames while sending them.

Lee Howard committed [r66] on Code

Lee Howard — Thu, 20 Feb 2025 19:02:06 -0000

Now that we're being more careful about when we're looking for jitter (limiting the search to signal reception) we can be more liberal in what we consider "null" data.

Lee Howard committed [r65] on Code

Lee Howard — Wed, 19 Feb 2025 23:22:56 -0000

It turns out that the reason behind r63 and r62 was because our jitter coping mechanism caused deliberately silent audio to get ignored, and thus the low_samples counter wasn't incrementing sufficiently.

Lee Howard committed [r64] on Code

Lee Howard — Thu, 13 Feb 2025 18:27:06 -0000

Follow r61 (2025-02-02) and do the same with the high-speed modems on carrier loss... so that a restart of the same modem will include V.21 HDLC detection.

Lee Howard committed [r63] on Code

Lee Howard — Thu, 13 Feb 2025 06:23:07 -0000

Decrease it even further.

Lee Howard committed [r62] on Code

Lee Howard — Wed, 12 Feb 2025 20:49:44 -0000

If there is a little something between TEP and the V.17 fax train carrier it can cause us to miss the training.

Lee Howard committed [r61] on Code

Lee Howard — Sun, 02 Feb 2025 19:08:29 -0000

If V.21 HDLC is interrupted we need to reset.

Lee Howard committed [r60] on Code

Lee Howard — Sun, 02 Feb 2025 04:07:58 -0000

Add +FRCNG results for CNG detection during +FRH and +FRM commands

Lee Howard committed [r59] on Code

Lee Howard — Fri, 31 Jan 2025 05:39:53 -0000

Allow for ATD to be used during a call.

Lee Howard committed [r58] on Code

Lee Howard — Tue, 07 Jan 2025 01:10:09 -0000

Fix some build warnings and...

Lee Howard committed [r57] on Code

Lee Howard — Sat, 28 Dec 2024 04:56:31 -0000

Refactor DTMF presentation code.

IAXmodem released /iaxmodem/iaxmodem-1.3.4.tar.gz

IAXmodem — Mon, 23 Jan 2023 19:58:01 -0000

Lee Howard committed [r56]

Lee Howard — Mon, 14 Nov 2022 18:49:51 -0000

release 1.3.4

Lee Howard committed [r55]

Lee Howard — Mon, 26 Sep 2022 12:45:53 -0000

implement S11 and S12 jitter counters

Lee Howard committed [r54]

Lee Howard — Tue, 20 Sep 2022 17:55:02 -0000

Try to cope with upstream jitter.

Lee Howard committed [r53]

Lee Howard — Thu, 14 Oct 2021 21:09:00 -0000

This CONNECT message is superfluous.

Lee Howard committed [r52]

Lee Howard — Sun, 26 Sep 2021 01:04:37 -0000

Take 3. This correctly addresses the issue that was attempted to be fixed by r50 and r51.

Lee Howard committed [r51]

Lee Howard — Fri, 24 Sep 2021 21:07:34 -0000

The previous change doubled-up "NO CARRIER" messages in some instances. This approach should be safe from that.

Lee Howard committed [r50]

Lee Howard — Fri, 24 Sep 2021 14:02:27 -0000

Send NO CARRIER message if hangup occurs during data transmit

IAXmodem released /iaxmodem/iaxmodem-1.3.3.tar.gz

IAXmodem — Fri, 27 Aug 2021 03:45:02 -0000

Lee Howard committed [r49]

Lee Howard — Thu, 29 Jul 2021 23:28:58 -0000

Continuation of yesterday's attempt to prevent multiple CONNECT messages following +FRH=3

Lee Howard committed [r48]

Lee Howard — Wed, 28 Jul 2021 16:10:04 -0000

bump

Lee Howard committed [r47]

Lee Howard — Wed, 28 Jul 2021 16:01:26 -0000

Prevent multiple CONNECT messages after +FRH=3 which could have been occurring when the DTE was slow enough that spandsp would buffer messages.

ROBERT BOISVERT posted a comment on discussion Open Discussion

ROBERT BOISVERT — Mon, 03 May 2021 21:12:09 -0000

Thank you we appreciate your help.

Lee Howard posted a comment on discussion Open Discussion

Lee Howard — Wed, 28 Apr 2021 18:00:12 -0000

Thank you. See: https://sourceforge.net/p/iaxmodem/code/46/

Lee Howard committed [r46]

Lee Howard — Wed, 28 Apr 2021 17:57:19 -0000

These changes are a contribution from Robert Boisvert and the Alpine Linux team to address issues that were encountered while running iaxmodem in valgrind.

ROBERT BOISVERT posted a comment on discussion Open Discussion

ROBERT BOISVERT — Wed, 28 Apr 2021 14:49:01 -0000

In my testing it appeared that frame->session was released but I was not able to prove that conclusively and I didn't have the time to check where it was released. You can credit the Alpine Linux team for helping out.

Lee Howard posted a comment on discussion Open Discussion

Lee Howard — Tue, 27 Apr 2021 19:29:42 -0000

Thank you. Who do I credit on this work? Regarding the libiax2/src/iax.c change, can you identify which structure was already freed and where it was freed?

ROBERT BOISVERT modified a comment on discussion Open Discussion

ROBERT BOISVERT — Tue, 27 Apr 2021 19:17:06 -0000

I was able to resolve all the bugs with the attached patch file. Can you review and apply them if you agree? It contains the following adjustments. iaxmodem.c: initialize tioflags before using lib/libiax2/src/iax.c: remove a check on a structure that was already free'd lib/spandsp/src/at_interpreter.c: apply a patch that was provided in a later version of this library Thank you, Bob

ROBERT BOISVERT posted a comment on discussion Open Discussion

ROBERT BOISVERT — Tue, 27 Apr 2021 18:21:36 -0000

I was able to resolve all the bugs with the attached patch file. Can you review and apply them if you agree? It contains the following adjustments. iaxmodem.c: initial tioflags before using lib/libiax2/src/iax.c: remove a check on a structure that was already free'd lib/spandsp/src/at_interpreter.c: apply a patch that was provided in a later version of this library Thank you, Bob

Lee Howard posted a comment on discussion Open Discussion

Lee Howard — Thu, 22 Apr 2021 16:26:46 -0000

Without being able to reproduce this crash and the associated valgrind log file, myself, it will be unlikely for me to be able to efficiently troubleshoot and determine either a code fix for iaxmodem or conclude that the fault lies within Alpine's new malloc() function. The valgrind log seems to point at five distinct issues: 1) conditional jump or move depending on uninitialized value in at_cmd_plus_VSID 2) ioctl call parameter pointing to uninitialized byte(s) in start_modem 3) ioctl call parameter...

ROBERT BOISVERT posted a comment on discussion Open Discussion

ROBERT BOISVERT — Thu, 22 Apr 2021 15:23:08 -0000

We are using Hylafaxplus 7.0.3 to receive faxes from iaxmodem. The faxgetty program receives the fax, calls the faxrcvd script and then iaxmodem crashes. We put a pause in faxrcvd so that it would take no actions and iaxmodem still crashes. The malloc () function was recently updated on Alpine 3.13 so it is possible that it has a problem or that it is more sensitive to errors in the existing code. We would appreciate any suggestions you may have on how to track down this error.

Lee Howard posted a comment on discussion Open Discussion

Lee Howard — Wed, 21 Apr 2021 17:57:15 -0000

What are the steps to reproduce this crash and the associated valgrind log file?

ROBERT BOISVERT posted a comment on discussion Open Discussion

ROBERT BOISVERT — Wed, 21 Apr 2021 17:42:11 -0000

We are using iaxmodem 1.3.2 on Alpine Linux 3.13 and it is crashing when using Hylafaxplus 7.0.3. The problem seems to be triggered by an access to freed memory. I attached the valgrind log file which includes debugging data to identify the source of the problem. Can you assist us in finding in the root cause? Thank you, Bob

Lee Howard posted a comment on discussion Help

Lee Howard — Wed, 13 Jan 2021 20:46:54 -0000

I don't know of anyone doing any active development to get data modes supported in iaxmodem. It's open source, so you're welcome to do add it, yourself, or hire someone to do it. No, I don't know of any other virtual modem to do data communication... it seems even less necessary than fax in an internet age.

Lanea Lucy Schwarz posted a comment on discussion Help

Lanea Lucy Schwarz — Wed, 13 Jan 2021 20:24:01 -0000

is there data mode planed to be supported then in future? or you know any other virtual modem software for this?

Lee Howard posted a comment on discussion Help

Lee Howard — Wed, 13 Jan 2021 20:20:04 -0000

Did you see any suggestion anywhere that iaxmodem supported data modes? SpanDSP does have a lot of code to support data communication other than fax, but I've never seen them used. iaxmodem was designed for fax. You could have a custom application on the sender and the receiver to communicate data in the fax modes (such as using V.21) - but I don't think that you could get that with mgetty.

Lanea Lucy Schwarz modified a comment on discussion Help

Lanea Lucy Schwarz — Wed, 13 Jan 2021 20:18:33 -0000

i just want text, no fax. later want attach mgetty to it EDIT: like in the old BBS days i want setup a BBS. want use mgetty to make modem to telnet gateway and then connect to telnet bbs

Lanea Lucy Schwarz posted a comment on discussion Help

Lanea Lucy Schwarz — Wed, 13 Jan 2021 20:15:20 -0000

i just want text, no fax. later want attach mgetty to it

Lee Howard posted a comment on discussion Help

Lee Howard — Wed, 13 Jan 2021 20:09:43 -0000

What are you trying to do, though? Are you using HylaFAX?

Lanea Lucy Schwarz posted a comment on discussion Help

Lanea Lucy Schwarz — Wed, 13 Jan 2021 20:03:18 -0000

tried to compile 1.3.2 same problem, no response after ATA

Lanea Lucy Schwarz modified a comment on discussion Help

Lanea Lucy Schwarz — Tue, 12 Jan 2021 00:04:41 -0000

yes, and now i get connect message too but then i cant hangup in modem, only with softphone

Lanea Lucy Schwarz modified a comment on discussion Help

Lanea Lucy Schwarz — Tue, 12 Jan 2021 00:03:52 -0000

yes, and now i get connect message too but then i cant hangup in modem

Lanea Lucy Schwarz posted a comment on discussion Help

Lanea Lucy Schwarz — Tue, 12 Jan 2021 00:02:10 -0000

yes, and now i get connect message too

Lanea Lucy Schwarz modified a comment on discussion Help

Lanea Lucy Schwarz — Mon, 11 Jan 2021 23:55:40 -0000

i tried it on two different systems, one of a friend in docker, and after having this problem in my own local debian vm i can upload the docker image Edit: tried with pty now too, same result, see attached photo

Lee Howard posted a comment on discussion Help

Lee Howard — Mon, 11 Jan 2021 23:49:33 -0000

What happens if you call using a voice line into the modem and answer? Do you hear fax tones? (You should probably use AT+FCLASS=1, though. Do the session like I did it.)

Lanea Lucy Schwarz modified a comment on discussion Help

Lanea Lucy Schwarz — Mon, 11 Jan 2021 23:41:25 -0000

i tried it on two different systems, one of a friend in docker, and after having this problem in my own local debian vm i can upload the docker image

Lanea Lucy Schwarz posted a comment on discussion Help

Lanea Lucy Schwarz — Mon, 11 Jan 2021 23:39:40 -0000

i tried it on two different systems, one of a friend, and after having this problem in my own local debian vm

Lee Howard posted a comment on discussion Help

Lee Howard — Mon, 11 Jan 2021 17:10:23 -0000

Maybe something is wrong with the Debian build or the ptys there. I'm using Fedora and CentOS... but I don't recall hearing this kind of problem from anyone before. And iaxmodem has been around for a long, long time now.

Lanea Lucy Schwarz modified a comment on discussion Help

Lanea Lucy Schwarz — Mon, 11 Jan 2021 02:02:25 -0000

the problem is that after ata i dont get any response, no ok, no connect and input isn't responding too. i try to simply test the connection for future use, but it don't work even here. no input is accepted, no text, nothing, it just hangs and do nothing

Lanea Lucy Schwarz posted a comment on discussion Help

Lanea Lucy Schwarz — Mon, 11 Jan 2021 00:49:48 -0000

Lee Howard posted a comment on discussion Help

Lee Howard — Mon, 11 Jan 2021 00:44:28 -0000

It's not clear to me what you're attempting to accomplish with this test. So, I'm just going to follow the same procedure more or less to show you what I get: Dialing modem: at&f OK atdt306 CONNECT OK ath OK Answering modem: at&f OK RING ata CONNECT NO CARRIER ath OK In this scenario after the two modems both report "CONNECT" they are connected, and they will stay there indefinitely until there is other input from one or the other DTEs. When I pressed enter in minicom on...

Lanea Lucy Schwarz posted a comment on discussion Help

Lanea Lucy Schwarz — Sun, 10 Jan 2021 01:06:53 -0000

hi, installed iaxmodem 1.2.0~dfsg-3 and asterisk on fresh installed debian vm, set up 2 modems with default config from source code (iaxmodem-cfg.ttyIAX). connecting to both modems with minicom (minicom -D /dev/ttyIAX1). Can dial (ATDT 123) and answer on other modem (ATA) and then it hangs and dont accept any other input after this, no AT commands, no text. after killing connection it responds again. tryed similar setup on other system same result. AT OK ATDT 123 AT OK RING ATA

Hans Melgers posted a comment on discussion Help

Hans Melgers — Mon, 07 Dec 2020 22:10:09 -0000

Hi all, I'm having some weird issues after updating my centos7 box. It also updated asterisk to 18.0.1. I'm running hylafax/iaxmodem and asterisk on the same box. Iaxmodem is version 1.3.0-1.el7.fws I noticed there are no error messages but iaxmodem is just not registering: /usr/bin/iaxmodem ttyIAX0 [2020-12-07 23:01:18.356249] Modem started [2020-12-07 23:01:18.356795] Setting device = '/dev/ttyIAX0' [2020-12-07 23:01:18.356868] Setting owner = 'uucp:uucp' [2020-12-07 23:01:18.356911] Setting mode...

IAXmodem released /iaxmodem/iaxmodem-1.3.2.tar.gz

IAXmodem — Fri, 17 Jul 2020 03:29:05 -0000

Lee Howard committed [r45]

Lee Howard — Wed, 15 Jul 2020 21:48:53 -0000

bump

Lee Howard committed [r44]

Lee Howard — Wed, 15 Jul 2020 21:24:24 -0000

Adds the audiobuflen feature.

Hans Melgers posted a comment on discussion Help

Hans Melgers — Wed, 15 Jul 2020 13:48:02 -0000

It worked after deleting the old iaxmodem1.3.1 dir and start from scratch. Thanks!

Lee Howard posted a comment on discussion Help

Lee Howard — Wed, 15 Jul 2020 13:23:20 -0000

I did a minimal install of CentOS 7 (7.8.2003) from the Netinstall ISO here: http://centos.s.uw.edu/centos/7.8.2003/isos/x86_64/ I ran 'yum update' and rebooted. I installed the following packages via yum along with their dependencies: wget, gcc, gcc-c++, libtiff-devel, I downloaded iaxmodem-1.3.1 from here: https://sourceforge.net/projects/iaxmodem/files/iaxmodem/iaxmodem-1.3.1.tar.gz/download I did the following: tar xzvf iaxmodem-1.3.1.tar.gz cd iaxmodem-1.3.1 find . -exec touch -r configure {}...

Hans Melgers posted a comment on discussion Help

Hans Melgers — Wed, 15 Jul 2020 09:09:59 -0000

Thanks Lee, unfortunately that didn't help. I' m still getting the same error: make[3]: Entering directory `/root/iaxmodem-1.3.1/lib/spandsp/src' make[3]: LIBTOOL@: Command not found make[3]: *** [ademco_contactid.lo] Error 127 Maybe something else going on ?

Lee Howard posted a comment on discussion Help

Lee Howard — Tue, 14 Jul 2020 22:21:36 -0000

It's make's annoying habit of checking on the modification time of aclocal.m4, Makefile.in, and configure... coupled with weirdly old modification times in the spandsp-0.0.6 tarball. If you run this from your iaxmodem-1.3.1 directory: find . -exec touch -r configure {} \; ... then it should work. This will be resolved in the next release.

Hans Melgers posted a comment on discussion Help

Hans Melgers — Tue, 14 Jul 2020 13:39:56 -0000

Hi, I'm having trouble compiling 1.31 on centos7, 1.2.0 compiles without any problems. There seems to be an issue with libtool but i can't find any solution to this. Here's the output: cd lib/libiax2 && make make[1]: Entering directory /root/iaxmodem-1.3.1/lib/libiax2' Making all in src make[2]: Entering directory/root/iaxmodem-1.3.1/lib/libiax2/src' make[2]: Nothing to be done for all'. make[2]: Leaving directory/root/iaxmodem-1.3.1/lib/libiax2/src' make[2]: Entering directory /root/iaxmodem-1.3.1/lib/libiax2'...

Lee Howard committed [r43]

Lee Howard — Tue, 10 Dec 2019 01:27:17 -0000

This stops the fast looping from happening after 45 seconds and before the S7 register expires.

IAXmodem released /iaxmodem/iaxmodem-1.3.1.tar.gz

IAXmodem — Wed, 27 Nov 2019 01:07:03 -0000

Lee Howard posted a comment on discussion Open Discussion

Lee Howard — Thu, 05 Sep 2019 16:42:29 -0000

iaxmodem has a built-in version of spandsp which has those debug messages commented-out. However, iaxmodem can be built using a shared system spandsp DSO, and if your installation is using that, then I'd guess the debug messages are there. They can be disabled in spandsp unsetting SPAN_LOG_FLOW in the various spandsp logging levels, but I don't immediately know how that's done. My advice would be to uninstall iaxmodem and reinstall it from source - this time building it with static libraries rather...

Markus Hammerer posted a comment on discussion Open Discussion

Markus Hammerer — Wed, 04 Sep 2019 05:03:37 -0000

Thanks for your answer I am using 1.2.0 I tested some different iaxmodem versions I think it was from this testing but i can`t find anything about the debug function thanks Von: Lee Howard faxguy@users.sourceforge.net Gesendet: Dienstag, 3. September 2019 16:44 An: [iaxmodem:discussion] 497500@discussion.iaxmodem.p.re.sourceforge.net Betreff: [iaxmodem:discussion] Re: iaxmodem syslog What version of iaxmodem are you using? I do see these debug messages in spandsp, but they're commented out in the...

Lee Howard posted a comment on discussion Open Discussion

Lee Howard — Tue, 03 Sep 2019 14:44:03 -0000

What version of iaxmodem are you using? I do see these debug messages in spandsp, but they're commented out in the spandsp that comes with iaxmodem v1.3.0.

Markus Hammerer posted a comment on discussion Open Discussion

Markus Hammerer — Tue, 03 Sep 2019 09:57:15 -0000

Helo I installed the hylafax with Asterisk 13.25 on Debian 8 The Hylafax is working but in the syslog under var/log/syslog it sends many messages like this for only one Fax The message will be created from Iaxmodem but i cant see any informations where i can disable this Aug 27 13:51:17 fax2 iaxmodem[586]: Im = 2.81149 ( 100.00000) f = 1800.00037 Aug 27 13:51:17 fax2 iaxmodem[586]: v = -1.09064 0 - 89.914124 -55.838379 -289 Aug 27 13:51:17 fax2 iaxmodem[586]: Im = -1.56853 ( 100.00000) f = 1800.00000...

walterkt modified a comment on discussion Help

walterkt — Thu, 14 Feb 2019 08:49:13 -0000

Hi Everyone, Hylafax installed with iaxmodem on my Raspberry Pi B+ that running Asterisk 13.24.1, installation follows this (http://www.raspberry-asterisk.org/documentation/#fax), from Asterisk log I can see the incoming fax call is accepted by iaxmodem but it just keeps ringing and no answer. Is there any way I can confirm my settings are all correct? Thanks. == Spawn extension (, 1000, 1) exited non-zero on 'IAX2/1000-2830' -- IAX2/1000-2830 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=...

walterkt modified a comment on discussion Help

walterkt — Thu, 14 Feb 2019 08:48:07 -0000

Hi Everyone, Hylafax installed with iaxmodem on my Raspberry Pi B+ that running Asterisk 13.24.1, installation follows this (http://www.raspberry-asterisk.org/documentation/#fax), from Asterisk log I can see the incoming fax call is accepted by iaxmodem but it just keeps ringing and no answer. == Spawn extension (, 1000, 1) exited non-zero on 'IAX2/1000-2830' -- IAX2/1000-2830 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL= -- Call accepted by 127.0.0.1:4570 (format ulaw) -- Format...

walterkt modified a comment on discussion Help

walterkt — Thu, 14 Feb 2019 08:46:18 -0000

Hi Everyone, Hylafax installed with iaxmodem on my Raspberry Pi B+ that running Asterisk 13.24.1, installation follows this (http://www.raspberry-asterisk.org/documentation/#fax), from Asterisk log I can see the incoming fax call is accepted by iaxmodem but it just keeps ringing and no answer. == Spawn extension (, 1000, 1) exited non-zero on 'IAX2/1000-2830' -- IAX2/1000-2830 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL= -- Call accepted by 127.0.0.1:4570 (format ulaw) -- Format...

walterkt modified a comment on discussion Help

walterkt — Thu, 14 Feb 2019 08:45:16 -0000

Hi Everyone, Hylafax installed with iaxmodem on my Raspberry Pi B+ that running Asterisk 13.24.1, installation follows this (http://www.raspberry-asterisk.org/documentation/#fax), from Asterisk log I can see the incoming fax call is accepted by iaxmodem but it just keeps ringing and no answer. == Spawn extension (, 1000, 1) exited non-zero on 'IAX2/1000-2830' -- IAX2/1000-2830 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL= -- Call accepted by 127.0.0.1:4570 (format ulaw) -- Format...

walterkt posted a comment on discussion Help

walterkt — Thu, 14 Feb 2019 08:37:40 -0000

Hi Everyone, Hylafax installed with iaxmodem on my Raspberry Pi B+ that running Asterisk 13.24.1, installation follows this (http://www.raspberry-asterisk.org/documentation/#fax), from Asterisk log I can see the incoming fax call is accepted by iaxmodem but it just keeps ringing and no answer. == Spawn extension (, 1000, 1) exited non-zero on 'IAX2/1000-2830' -- IAX2/1000-2830 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL= -- Call accepted by 127.0.0.1:4570 (format ulaw) -- Format...

Lee Howard committed [r42]

Lee Howard — Mon, 28 Jan 2019 02:32:41 -0000

bump

Jerry Kaidor posted a comment on discussion Help

Jerry Kaidor — Thu, 10 Jan 2019 19:02:46 -0000

I am having the same problem! Asterisk 13.4 and iaxmodem 1.3.0. I traced it to a test in chan_iax2.c. It was complaining that the "peer was not dynamic". I commented out that test, and now it registers successfully. / if (!ast_test_flag64(p, IAX_DYNAMIC)) { if (authdebug) ast_log(LOG_NOTICE, "Peer '%s' is not dynamic (from %s)\ goto return_unref; }/ My understanding is that "dynamic" means that a peer does not have a configured IP address - so it is wherever it is. Iaxmodem is of course not "dynamic"...

Lee Howard committed [r41]

Lee Howard — Mon, 07 Jan 2019 22:32:52 -0000

Stop the noise.

Lee Howard committed [r40]

Lee Howard — Mon, 07 Jan 2019 22:17:40 -0000

From Stephan Eisvogel. Use fflush and move away from uucp naming.

Lee Howard committed [r39]

Lee Howard — Mon, 07 Jan 2019 04:25:30 -0000

Stephan Eisvogel reported this bug fix.

Lee Howard committed [r38]

Lee Howard — Mon, 07 Jan 2019 04:18:40 -0000

ITU-T V.250 6.3.1 defines the ATD command. It states:

Jackie Roberts modified a comment on discussion Help

Jackie Roberts — Fri, 28 Dec 2018 03:44:34 -0000

I've removed the dynamic=yes entry. I'm not sure where I got the entry I had to have found it on some site somewhere. Like I said I've been trying for a long time with a lot of different configurations. I'm not sure how to watch CLI as it registers. I restarted asterisk to reload the configuration then I have a terminal open in CLI>iax2 show peers with this output iax2 show peers Name/Username Host Mask Port Status Description ttyIAX0 127.0.0.1 (S) 255.255.255.255 12502 Unmonitored 1 iax2 peers [0...

Jackie Roberts posted a comment on discussion Help

Jackie Roberts — Fri, 28 Dec 2018 03:40:01 -0000

Lee Howard posted a comment on discussion Help

Lee Howard — Thu, 27 Dec 2018 22:27:12 -0000

Your iax.conf context entry looks a bit odd with "dynamic=yes". (Is that even an allowable directive?) The "host=" and "port=" entries seem to conflict with any meaning of "dynamic" or registration. Anyway, probably the best approach to troubleshooting registration errors is to watch the Asterisk CLI as it attempts registration and to see what it says.