Open Source Mac Home Automation Software
Sort By:
Home Automation Software for Mac
View 737 business solutionsBrowse free open source Home Automation software and projects for Mac below. Use the toggles on the left to filter open source Home Automation software by OS, license, language, programming language, and project status.
-
Earn up to 15% annual interest with Nexo.Put idle assets to work with competitive interest rates, borrow without selling, and trade with precision. All in one platform. Geographic restrictions, eligibility, and terms apply.
-
Earn up to 15% annual interest with Nexo.Generate interest, borrow against your crypto, and trade a range of cryptocurrencies — all in one platform. Geographic restrictions, eligibility, and terms apply.
-
1
Arduino core for the ESP32
Arduino core for the ESP32
ESP32 is a single 2.4 GHz Wi-Fi-and-Bluetooth SoC (System On a Chip) designed by Espressif Systems. ESP32 is designed for mobile, wearable electronics, and Internet-of-Things (IoT) applications. It features all the state-of-the-art characteristics of low-power chips, including fine-grained clock gating, multiple power modes,and dynamic power scaling. For instance, in a low-power IoT sensor hub application scenario, ESP32 is woken-up periodically and only when a specified condition is detected. The low-duty cycle is used to minimize the amount of energy that the chip expends. The output of the power amplifier is also adjustable, thus contributing to an optimal trade-off between communication range, data rate and power consumption. The ESP32 series is available as a chip or module. You can use Arduino-ESP32 Online Documentation to get all information about this project. -
2
OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino
OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing, by the way, the number of physical bridges needed, and hiding the different technologies singularity behind a simple & widespread communication protocol; MQTT. MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ thermometer compatibility, SMS & LORA. OpenMQTTGateway supports very mature technologies like basic 433mhz/315mhz protocols & infrared (IR) so you can make your old dumb devices "smart" and avoid throwing them away. These devices also have the advantage of having a lower cost compared to Zwave or more sophisticated protocols. OMG also supports up-to-date technologies like Bluetooth Low Energy (BLE) or LORA. -
3
PX4 Drone Autopilot
PX4 Autopilot Software
PX4 is used in a wide range of use-cases, from consumer drones to industrial applications. It is also the leading research platform for drones and has been successfully applied to underwater vehicles and boats. PX4 provides a standard to deliver drone hardware support and software stack, allowing an ecosystem to build and maintain hardware and software in a scalable way. Drone development is complicated, and how to get started can be daunting and hard to navigate. These tutorials and resources provide a walkthrough of the basics of PX4. PX4 is highly portable, OS-independent and supports Linux, NuttX and MacOS out of the box. The PX4 User Guide explains how to assemble supported vehicles and fly drones with PX4. See the forum and chat if you need help! -
4
Concourse
Concourse is a container-based continuous thing-doer written in Go
Built on the simple mechanics of resources, tasks, and jobs, Concourse presents a general approach to automation that makes it great for CI/CD. Concourse is designed to be expressive, versatile, and safe, remaining intuitive as the complexity of your project grows. A Concourse pipeline is like a distributed, continuous Makefile. Each job has a build plan declaring the job's input resources and what to run with them when they change. Your pipeline is then visualized in the web UI, taking only one click to get from a failed job to seeing why it failed. The visualization provides a "gut check" feedback loop: if it looks wrong, it probably is wrong. Jobs can depend on other jobs by configuring passed constraints. The resulting chain of jobs and resources is a dependency graph that continuously pushes your project forward, from source code to production. -
One Unified Time Tracking Software For Projects, Billing, Pay and ComplianceReplicon's time-tracking platform is scalable and configurable to support the diverse needs of small, mid & large businesses with a remote and globally distributed workforce. Replicon’s Time Tracking is a cloud-based, enterprise-grade solution that tracks employee time across projects, tasks, presence, and absence to facilitate client billing, project costing, and compliant payroll processing. The scalable and configurable platform offers seamless integration with common business technology stacks, such as ERP, CRM, Accounting, and payroll solutions. With AI-powered time capture, mobile apps, and labor compliance as a service, Replicon makes time tracking hassle-free.
-
5
Home Assistant
Open source home automation that puts local control and privacy first
Home Assistant is a powerful open source home automation app that prioritizes local control and privacy. It offers great security and features while keeping your data securely out of the cloud. It can give you control of all your devices from a single, mobile-friendly interface and will track the state of all these devices so you don’t have to. Home Assistant is powered by a worldwide community and runs ideally on a Raspberry Pi or a local server. It can be set up to automatically control devices, so whether you want to be alerted when the lights turn on when you’re not at home, or want the lights to automatically dim when you start to watch a movie on Chromecast, Home Assistant can do it for you. See more examples on the official website: https://www.home-assistant.io/ -
6
ESPectre
Motion detection system based on Wi-Fi spectre analysis (CSI)
ESPectre is an open-source motion detection system that transforms ordinary Wi-Fi signals into an ambient sensor capable of detecting movement without using cameras, microphones, or additional radio hardware, making it a privacy-preserving and cost-effective alternative for presence sensing and smart home automation. At its core, it analyzes Wi-Fi Channel State Information (CSI) — detailed measurements of how Wi-Fi waves change as they propagate — to mathematically detect disturbances caused by human movement between a Wi-Fi router and an ESP32 microcontroller, eliminating the need for machine learning or training data to operate effectively. Designed to integrate natively with Home Assistant through ESPHome, ESPectre exposes motion and movement intensity sensors directly to home automation dashboards, allowing users to trigger automations like lighting, heating, or security alerts when motion is detected. -
7
Homebridge Raspberry Pi Image
Homebridge Raspberry Pi Image based on Raspberry Pi OS Lite
This project provides a free Raspbian-based Raspberry Pi image with Homebridge and Homebridge Config UI X pre-installed. This image also provides a command called hb-config which helps you keep Node.js up-to-date, perform maintenance on your Homebridge server, and install additional optional software such as Pi Hole and deCONZ. The Homebridge service is installed using the method described in the Raspberry Pi Installation Guide on the Homebridge project wiki. The easiest way to flash the Homebridge Raspberry Pi Image to your SD card is to use the Raspberry Pi Imager. Raspberry Pi Imager will now download and flash the latest version of the Homebridge Raspberry Pi Image to your SD card, this may take several minutes depending on the speed of your internet connection and SD card. The Homebridge UI web interface will allow you to install, remove and update plugins, and modify the Homebridge config.json and manage other aspects of your Homebridge service. -
8
Homebridge
HomeKit support for the impatient
Homebridge is a lightweight NodeJS server you can run on your home network that emulates the iOS HomeKit API. It supports Plugins, which are community-contributed modules that provide a basic bridge from HomeKit to various 3rd-party APIs provided by manufacturers of "smart home" devices. Since Siri supports devices added through HomeKit, this means that with Homebridge you can ask Siri to control devices that don't have any support for HomeKit at all. Once your device has been added to HomeKit, you should be able to tell Siri to control your devices. However, realize that Siri is a cloud service, and iOS may need some time to synchronize your device information with iCloud. One final thing to remember is that Siri will almost always prefer its default phrase handling over HomeKit devices. For instance, if you name your Sonos device "Radio" and try saying "Siri, turn on the Radio" then Siri will probably start playing an iTunes Radio station on your phone. -
9
homebridge-samsung-tizen
Homebridge plugin for Samsung TV's with Tizen OS
Homebridge Samsung Tizen is a plugin created for Homebridge that allows you to control your Samsung TVs (models starting from 2017) that are running Tizen Operating System. Please make sure to read our shiny documentation where you find step-by-step instructions with images on how to install and configure the plugin. If you find this plugin useful and want to show your support then please star this plugin, or better yet; you can donate through PayPal whatever you think the plugin value is. You can also use other methods by checking the Sponsor this project section from the right sidebar. This plugin was designed for Homebridge and will require you to set up a Homebridge server. Homebridge is a lightweight server you can run on your home network that emulates the iOS HomeKit API and allows you to control devices that are incompatible with HomeKit. -
Workable Hiring Software - Hire The Best People, FastWorkable is the preferred software for today's recruiting industry and HR teams, trusted by over 6,000 companies to streamline their hiring processes. Finding the right person for the job has never been easier—users now possess the ability to manage multiple hiring pipelines at once, from posting a job to sourcing candidates. Workable is also seamlessly integrated between desktop and mobile, allowing admins full control and flexibility all in the ATS without needing additional software.
-
10
SerialToIP is a simple Terminal Server software providing transparent pipe either in TCP server or TCP client socket mode from TCP/IP to a pre-configured serial port. Implemented in C# for .NET 2.0 so the command line version could work in Mono-runtime as well.
-
11
Home Assistant Config (hass-config)
A different take on designing a Lovelace UI (Dashboard)
hass-config is a user’s home automation configuration repository (for Home Assistant) that captures their YAML files, scripts, automations, dashboards, and integrations in a version-controlled layout. By organizing all Home Assistant components—sensors, automations, scripts, themes, and Lovelace UI definitions—into a structured hierarchy, the repo helps maintain consistency, shareability, and backup of the smart home setup. Because Home Assistant involves complex interdependencies between devices and automations, having a central config repo ensures changes are traceable and easily reverted. The repository often includes templates, secrets configuration, and skip-files to avoid committing sensitive credentials. For users running multiple installations or migrating devices, hass-config serves as the canonical definition of the automation state. It’s especially helpful for community users who share automations, troubleshoot setups, or onboard new devices. -
12
Ring
Unofficial packages for Ring Doorbells, Cameras, Alarm System
This repo contains unofficial packages to enable interaction and automation with the majority of Ring products. The ring-client-API is a TypeScript package designed to be used by developers to create their own apps/programs which interact with Rings API. homebridge-ring allows users to integrate Ring products into Apple HomeKit via homebridge easily. With Ring you can control your home from your smartphone, tablet or PC. Each Ring device includes a camera, speakers, and an integrated microphone so you can view, listen, and speak to anyone on your property from anywhere. Ring's customizable motion sensors allow you to focus on the most important areas of your home. You will receive instant warnings as soon as your Ring device detects movement, so you are always the first to know if someone has gotten too close to your property. Ring allows you to monitor every corner of your property. -
13
google-access-helper
google access helper
Google Access Assistant cracked version, Google over the wall, Google ladder, Google ladder extension tool, Google store access, Chrome over the wall. Since the new version of Chrome has prohibited the installation of third-party applications, and this cracked version cannot be uploaded to the Chrome Web Store , it can only be run in developer mode. Clone warehouse: Click to download and unzip after downloading the file. Directly modify and delete the js file to retain the function of overturning the wall, this cracked version has been simplified. This software has been cracked and can be used for free forever. -
14
Homebridge UniFi Protect
Complete HomeKit integration for UniFi Protect with full support
Complete HomeKit integration for UniFi Protect with full support for most features including autoconfiguration, motion detection, and multiple controllers. homebridge-unifi-protect is a Homebridge plugin that provides HomeKit support to the UniFi Protect device ecosystem. UniFi Protect is Ubiquiti's video security platform, with rich camera, doorbell, and NVR controller hardware options for you to choose from, as well as an app which you can use to view, configure and manage your video camera and doorbells. This plugin attempts to bridge a gap in the UniFi Protect ecosystem by providing native HomeKit support on par with what you would expect from a first-party of native HomeKit solution. My north star is to create a plugin that just works with minimal required configuration by you to get up and running. The goal is to provide as close to a streamlined experience as you would expect from a first-party or native HomeKit solution. -
15
HDMI-CEC Tray
Use your TV remote to control Windows applications
HDMI-CEC Tray allows to control any Windows application using your current TV remote. (*) http://sites.google.com/site/chir21/home/CEC-Tray (*) Requires the Pulse-Eight USB-CEC adapter. Check if your HDTV supports HDMI-CEC. No more hassle with dedicated mediacenter remote controls and special infrared or Bluetooth receivers for your HTPC. Instead, HDMI-CEC Tray makes use of your HDTV's built-in CEC technology to control your PC. You will be able to control Mediacenter, VLC, MPC-HC, MediaPortal or XBMC as well as Powerpoint, to name a few. With HDMI-CEC Tray, you can navigate your HTPC menus, play and pause music, or fast-forward movies using only the TV remote. It's even possible to make the TV power on and switch to the right HDMI input automatically every time your HTPC starts. -
16
freeRTOS & libraries for AVR ATmega
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here. http://feilipu.me/?s=Goldilocks+Analogue The Goldilocks 1284p story is here. http://feilipu.me/2013/03/08/goldilocks-1284p-arduino-uno-clone/ If this repository is too complicated to get started, a minimum AVR freeRTOS configured using the Watchdog Timer and Heap 3 is also also available. https://github.com/feilipu/miniAVRfreeRTOS For the Arduino platform there is a freeRTOS Library available in the Arduino IDE Library manager. https://github.com/feilipu/Arduino_FreeRTOS_Library -
17
Step-by-step instructions for making your HVAC (Heating, Ventilation & Air Conditioning) system state-of-art. Covers airflow balancing, temperature control & zoning, energy conservation measures, remote access, 1-wire, XBee devices, home automation
-
18
Dream Bathroom
Our project team will build a new master suite bathroom.
Our project team has been contracted to build a new master suite bathroom in a new 4,000 Square ft. home, located in the Mission Hills district of Kansas City, Missouri. The project is titled “Dream bathroom,” which will be 14x14 feet (196 square feet). This exquisite bathroom will provide a ‘true spa experience,’ for the client. The completed bathroom will include a digital temperature control thermostat, a fully loaded two person steam shower, a large jetted soaking tub, heated marble floors, a double vanity, a remote skylight, fireplace and have a flat screen TV mounted into the wall. -
19
This is a Java library, which gives low level access to the WS300 weather station from ELV (http://www.elv.de/). There is a web frontend included which displays the weather data in a browser. The following hardware is supported: * WS300 PC (USB) * IPWE1 (LAN) * Raspberry Pi with FS20WUE (LAN)
-
20
ACTIface (A Customizable TP-UART Interface) connects a PC to a KNX TP1 (EIB TP) network. It is built around a popular ASIC (the TP-UART) and optionally includes a microcontroller for improving communication with the PC (or standalone operation).
-
21
ESP Easy
Arduino IDE sketch for ESP8266 modules
Firmware for ESP8266 modules. http://www.esp8266.nu/index.php/Tutorial_ESPEasy_Firmware_Upload Use an ESP8266 module as a wireless sensor for temperature, humidity, barometric pressure, LUX, etc. Or use it as an actuator to control Relays. Supports the following Home Automation platform protocols: * Domoticz HTTP * Domoticz MQTT * OpenHAB MQTT * PiDome MQTT * Nodo Telnet * ThingSpeak webservice * EmonCMS * FHEM HTTP * Generic HTTP using templates Supported devices: * DS18B20 * DHT11 * DHT22 * BH1750 * BMP085 * Wiegand RFID * PN532 * SI7021 * TSL2516 * HCSR04 * TSOP4838 IR * MCP23017 * PCF8591 * PCA9685 * LCD and OLED displays * BME280 * INA219 * MLX90614 * ADS1115 * MSP5611 * BMP280 * SHT1x The ESP is web configurable for both Wifi setup and device configuration. For support: - have a look at the wiki on www.esp8266.nu - join our forum on www.esp8266.nu/forum -
22
JeeLink for HomeSeer is a project to integrate JeeNodes in HomeSeer. Connect and configure multiple devices to a JeeNode and manage them from HomeSeer.
-
23
Professional stored program control. It is optimized for heat control, but you can control whatever you want. It use a FreeRTOS.org-Kernel on an Atmel AT32UC3A1512 and control Triacs over AVR ATtiny2313. The heatcontrol for your heating.
-
24
ARP Scout
Wait for a network device to come online and run an associated script
ARP Scout is a program that will run a script once when a device on your network comes online. Once it comes online it will keep tabs on the device and after a certain time out period it will run the script with the stop argument. ARP Scout monitors either the Linux Proc file system for changes in the the ARP cache or will use PCAP to watch for new MAC and IP address combinations. See the README file for more details. Note: Last updated on November 27th, 2011 See the CHANGE file for details. The last change was a small bug fix and tested on OS X. -
25
AWS IoT Arduino Yún SDK
SDK for connecting to AWS IoT from an Arduino Yún
The AWS-IoT-Arduino-Yún-SDK allows developers to connect their Arduino Yún compatible Board to AWS IoT. By connecting the device to the AWS IoT, users can securely work with the message broker, rules and the Thing Shadow provided by AWS IoT and with other AWS services like AWS Lambda, Amazon Kinesis, Amazon S3, etc. The AWS-IoT-Arduino-Yún-SDK consists of two parts, which take use of the resources of the two chips on Arduino Yún, one for native Arduino IDE API access and the other for functionality and connections to the AWS IoT built on top of AWS IoT Device SDK for Python. The AWS-IoT-Arduino-Yún-SDK provides APIs to let users publish messages to AWS IoT and subscribe to MQTT topics to receive messages transmitted by other devices or coming from the broker. This allows to interact with the standard MQTT PubSub functionality of AWS IoT.
