Open Source Linux SCADA Software
Sort By:
SCADA Software for Linux
View 15 business solutionsBrowse free open source SCADA software and projects for Linux below. Use the toggles on the left to filter open source SCADA software by OS, license, language, programming language, and project status.
-
Earn up to 15% annual interest with Nexo.Put idle assets to work with competitive interest rates, borrow without selling, and trade with precision. All in one platform. Geographic restrictions, eligibility, and terms apply.
-
Earn up to 15% annual interest with Nexo.Generate interest, borrow against your crypto, and trade a range of cryptocurrencies — all in one platform. Geographic restrictions, eligibility, and terms apply.
-
1
Yet Another BACnet Explorer
Graphical explorer for BACnet and Free BACnet library in C#
Graphical explorer program written in C#, for browsing BACnet devices (run on Windows & Linux). Supports BACnet MS/TP, Ethernet, IPv4, IPv6, SecureConnect Basic functions for read, write, read multiple, write multiple, iam, whois, subscribeCOV, notify, WriteFile, ReadFile etc. Includes three demo server applications : a generic server, a wall mounted room controller simulator, a weather server (gets data from an Internet webservice). Includes a lot of samples C# source code. Raspberry Pi server sample code, also tested on Beaglebone & Intel Edison. Bacnet/Mstp capture tool (only Wireshark and an Rs485 adaptor are required) BACnet/SC Hub sample application. See Readme.txt for more information. Active Developers/Contributors team : Morten Kvistgaard (2014-2016), Frédéric Chaxel (2015-2026), Lance Tollenaar (2022-2026) -
2
Ethernet/IP Explorer & C# Stack
Graphical explorer, browser for EtherNet/IP™ network
Ethernet/IP Explorer/Browser written in C#. Run on Windows & Linux with mono. ODVA CIP : Common Industrial Protocol. Shows devices on the local network. Displays the classes, instances, attributes. Decodes values using standard decoders and also ones defined by the user. Write attributes. Can send ForwardOpen for T->O and T->O data exchange, also with user defined decoder. Full open source code. Explicit & Implicit messaging basic client source codes. EtherNet/IP™ is a registered trademark of ODVA, Inc. -
3
QTester104
IEC 60870-5-104 protocol tester.
This software implements the IEC60870-5-104 protocol (client side) for substation data acquisition and control via tcp/ip network using the QT UI Framework. It can be compiled on Linux and Windows platforms. It's possible to poll and view data from the remote system (RTU) and also send commands. >>> Have a look also at my new SCADA project here: https://github.com/riclolsen/json-scada -
4
ScadaBR
Open source SCADA
We are now on GitHub: https://github.com/ScadaBR/ScadaBR ScadaBR is a SCADA (Supervisory Control and Data Acquisition) system with applications in Process Control and Automation, being developed and distributed using the open source model. -
Enterprise AI Agents for Every Customer MomentFrom chat to voice to SMS, every conversation gets a smart, personalized response powered by your policies, tone, and data.
-
5
OSHMI - Open Substation HMI
SCADA HMI for substations, IoT and automation applications
Now with IEC61850 support! This project combines existing open source projects and tools to create a very capable, mobile and cloud-friendly HMI system that can rival proprietary software. This approach makes it possible to join forces of each project (Chromium, SVG/HTML5, PHP, Lua, SQLite, Inkscape, Lib61850, OpenDNP3, Nginx, Vega, PostgreSQL, Grafana,…) to achieve a great set of open, evergreen, modular and customizable tools for building great HMIs for automation projects. This is not a toy project! It's been actually used in dozens of substations up to 230kV level and also in control centers with configurations up to 70.000 tags. Feel free to ask questions in the "Discussion" section. Help sponsoring OSHMI here https://github.com/sponsors/riclolsen. >>> Have a look also at my new SCADA project here: https://github.com/riclolsen/json-scada -
6
TANGO is a device oriented control system for Linux and Windows. It provides a framework in C++, Java and Python for implementing distributed control objects. TANGO has a full set of tools and hundreds of device servers.
-
7
IEC 104 Client Master Simulator tool
Simulate iec 104 client Master all ASDU monitor command file transfer
v21.06.018 Complete Simulation of IEC 104 Client as per Protocol Standard including File transfer (Both Monitoring and control direction). Add up to 50 Client node in the simulator. Every Client node will work independently. The user can monitor all data Point information, and quality bits. Send all type of commands, parameter activation, file transfer. * License Perpetual One-time payment, royalty-free Neither license manager nor dongle required Interoperability: http://www.freyrscada.com/docs/FreyrSCADA-IEC-60870-5-104-Client-Interoperability.pdf Download Evaluation Kit - IEC 60870-5-104 Development Bundle: In the Development Bundle, We included IEC 60870-5-104 Server & Client Simulator, Windows and Linux Software Development Kit. http://www.freyrscada.com/iec-60870-5-104.php video tutorial: https://www.youtube.com/playlist?list=PL4tVfIsUhy1bx7TVjtZnqFB6tbZBhOlJP -
8
WebVisu
Pure Browser based Visualisation for PLCs
Framework to enable PLC Visualisations (like Wago 750-841, Beck IPC, CoDeSys 2.3) displayed in a standalone Browser without Java applets. Including Browsers of iPad, iPhone, iPod, Android aso.. Based on HTML5 canvas and Javascript. -
9
SCL Manipulation and Configuration Tools, is a set of libraries and applications that allows to create and modify XML files witch use Substation Configutation Language based on IEC61850 part 6 standart.
-
The #1 AI-Powered eLearning PlatformTransform your content into engaging eLearning experiences with Coursebox, the #1 AI-powered eLearning authoring tool. Our platform automates the course creation process, allowing you to design a structured course in seconds. Simply make edits, add any missing elements, and your course is ready to go. Whether you want to publish privately, share publicly, sell your course, or export it to your LMS, Coursebox has you covered.
-
10
experix laboratory control system
instrument control, data acquisition display and analysis
Experix is a command-line driven environment for laboratory data acquisition and device control and graphical presentation and analysis of data. Written in C for GNU-Linux . Tested on PC and Raspberry Pi. The core is written very generally in order to support applications by means of script files. Device interfaces: PCMCIA daq (2 devices tested) via kernel module with interrupt handler and memory-mapped data; USB daq (1 device tested) using libusbx; running an equipment servicing program via pipes. Interfaces accessible via commands and scripts: file i/o modelled on stdio and stdlib; usb control and bulk transfers; socket operations; webcam; graphics via framebuffer. Applications (not all available yet for download) include: cell poker (like an atomic force microscope); tissue mechanical tester; fluorescence photobleaching; alternating laser excitation fluorescence; fluorescence intensity distribution analysis; iverilog simulation analysis. -
11
IEC104 Device RTU Server Simulator TCP
Simulate Complete IEC 104 RTU Server Monitor Command File transfer
v21.06.018 Complete Simulation of IEC 104 Server RTU as per Protocol Standard including File transfer (Both Monitoring and control direction). Add up to 50 server node in the simulator. Every server node will work independently. Tested with all leading commercial test tools. Support all type of Typeid ASDU, APCI, APDU, Command activation and termination commands. support all Cause of transmission (COT), Parameter in control direction. Interoperability: http://www.freyrscada.com/docs/FreyrSCADA-IEC-60870-5-104-Server-Interoperability.pdf Download Evaluation Kit - IEC 60870-5-104 Development Bundle: In the Development Bundle, We included IEC 60870-5-104 Server & Client Simulator, Windows and Linux Software Development Kit. http://www.freyrscada.com/iec-60870-5-104.php Video tutorial: https://www.youtube.com/playlist?list=PL4tVfIsUhy1bx7TVjtZnqFB6tbZBhOlJP -
12
openSCADA
openSCADA® is an open source SCADA system written in JAVA
openSCADA is an open source Supervisory Control And Data Acquisition System. It is platform independent and based on a modern system design that provides security and flexibility at the same time. openSCADA is flexible. It is not an out of the box solution, but a set of tools that can be combined in many different ways. It provides development libraries, interface applications, mass configuration tools, front-end and back-end applications. openSCADA is ready to rock. It is used 24/7 in several installations around this world. openSCADA is supported. So if you prefer a fully supported, out of the box instead of a “build it yourself” solution you can contact IBH SYSTEMS GmbH and let us do the job. If you like, you will still get the source code that was developed specially for you. openSCADA needs you. Writing source code, writing documentation, fixing bugs or providing fresh input. Anything is welcome. -
13
Modbus Master/Slave industrial terminal
Remote industrial terminal indicator to the control of Modbus-RTU on A
Remote industrial terminal indicator to the control of Modbus-RTU on Atmega128. Publication of "MODBUS on a leash. Remote industrial indicator. - Radiolybitel, Minsk, 2009, № 7, p.46" (series of articles http://radioliga.com). Project for IAR. -
14
IEC60870-5 101 tools code library
IEC 101 Server and Client Simulator Source code Library, Win, Linux
v21,06.018 IEC101 RTU Server Simulator, IEC101 Client Master Simulator, Static and Dynamic Libraries, Source Code Library. Driver for Windows, POSIX Linux, ARM , PowerPC, QNX & more * Make your RTU, protocol converter, Gateway, HMI, Data concentrator compatible with iec 101. * Download Free Evaluation Kit - IEC 60870-5-101 Development Bundle. * In the Bundle included IEC 101 Server & Client Simulator, Windows and Linux SDK, C# projects, Doxygen , Raspberry Pi, BeagleBone Demo library. http://www.freyrscada.com/iec-60870-5-101.php http://www.freyrscada.com/iec-60870-5-101-Server-Simulator.php http://www.freyrscada.com/iec-60870-5-101-Client-Simulator.php http://freyrscada.com/iec-60870-5-101-Windows-Software-Development-Kit(SDK).php http://freyrscada.com/iec-60870-5-101-Linux-Software-Development-Kit(SDK).php video tutorial: https://www.youtube.com/playlist?list=PL4tVfIsUhy1bsVPrJVW4nknHozdfcWE5u -
15
j2mod
Enhanced Modbus library implemented in the Java programming language
This is a fork of the jamod Modbus library, taken at version 1.2.1, released under the Apache 2 license, as contained in the SVN repository for that project. The goal of the j2mod project is to produce a more fully functioning Modbus(tm) communication library based on the Java programming language. It is the intention that this be an actively developed project, accepting submissions from professional software engineers with experience in Modbus Master and Slave development. -
16
DNP3 Protocol Linux Arm POSIX code
DNP3 Protocol Source code Library for Linux x86 x64 ARM PowerPC
v21.06.018 DNP3 Protocol Linux SDK Supports Embedded Linux (ARM, Coldfire, Power PC), Ubuntu Linux(X86, X86-64), Fedora, CentOS, Red Hat and POSIX Complaint OS The source code will allow you to quickly compile your own examples with the features of your existing development environment to work with our DNP3 library. DNP3 Linux SDK contains Shared Library(.a) (precompiled library), Static link lib, Demo Server & Client programs, CodeBlock Demo console project files, Doxygen . DNP3 Demo Linux Shared Library includes simple (Outstation Server & Client C programs )example using a Command window and command line inputs. Get a free DNP3 Development Bundle http://www.freyrscada.com/dnp3-ieee-1815.php Interoperability : http://www.freyrscada.com/docs/FreyrSCADA-DNP-Driver-Object-Variation-Support.pdf Video Tutorial: https://www.youtube.com/playlist?list=PL4tVfIsUhy1abOTxSed3l56FQux5Bn_gj -
17
-
18
JQM Java Quine McCluskey
JQM - Java Quine McCluskey for minimization of Boolean functions.
Java Quine McCluskey (JQM) implements the Quine-McCluskey algorithm with Petrick’s Method for minimizing Boolean functions. Designed for both education and industrial application, it handles up to 16 variables and functions. Uniquely, JQM bridges the gap between theory and practice: it visualizes the solution process with generated Karnaugh Maps for students, while supporting PLC engineers by exporting results to Structured Text (ST) and Ladder Diagram (LD). The software includes a GUI for managing truth tables and supports diverse file formats for import and export. -
19
OpenAPC
An open process control and laser engraving software solution
An extensive and multi-platform visualisation, process control and HMI application that supports many different devices via an open plug-in interface. Beside a visual GUI editor a debugger is part of the package. -
20
json-scada
A portable SCADA/IoT platform centered on the MongoDB database server.
Standard IT tools applied to SCADA/IoT (MongoDB, PostgreSQL/TimescaleDB,Node.js, C#, Golang, Grafana, etc.). MongoDB as the real-time core database, persistence layer, config store, SOE historian. Portability and interoperability over Linux, Windows, x86/64, ARM. Horizontal scalability, from a single computer to big clusters (MongoDB-sharding), Bare Metal, Docker containers, VM, cloud, or hybrid deployments. Unlimited tags, servers, and users. HTML5 Web interface. UTF-8/I18N. Protocols: IEC61850 Client, IEC60870-5-101/104 Client and Server, DNP3 Client, OPC-UA Client/Server, MQTT/Sparkplug-B, Telegraf (various data sources for monitoring like Modbus, SNMP, etc.) Github. project https://github.com/riclolsen/json-scada Requirements for Windows Installer: Windows 10/11 64 bits or Server 2016, Windows PowerShell. -
21
socan
A CAN Bus library for Linux that implements higher level functions.
This CAN bus library for Linux that implements higher level functions for writing CAN Bus applications. It is based on the SocketCAN interface, that is part of the Linux kernel. -
22
DNP3 Protocol Win Linux test tool code
DNP3 Outstation and client simulator, Source code Library, win, Linux
DNP3 Protocol - v21.06.018 Complete implementation of DNP3 protocol standard including File transfer. Binary Input, Double-bit Binary Input, Binary Output, Counter Input, Analog Input, Analog output, Octect String, virtual terminal String. support CROB, analog output command with "select-before-operate" or "direct-execute" command execution modes Industry proven, tested with all leading test tools. DNP3 Protocol RTU Outstation Server Simulator, Client Master Simulator, Source Code Library, Static and Dynamic Libraries for Windows, Linux, QNX - C, C++, C# .NET Demo Kit (Raspberry Pi & BeagleBone Black) or Customer specific Hardware. http://www.freyrscada.com/dnp3-ieee-1815.php Get a free DNP3 Protocol Development Bundle In the Development Bundle, We included DNP3 Outstation Server & Master Client Simulator, Windows & Linux SDK. DNP3 protocol Video Tutorial https://www.youtube.com/playlist?list=PL4tVfIsUhy1abOTxSed3l56FQux5Bn_gj -
23
IEC 104 Protocol Linux arm code download
IEC 104 Source code Library for Linux c c++ posix arm
v21.06.018 Complete implementation of IEC 104 including file transfer. Supports Embedded Linux (ARM, Coldfire, Power PC), Ubuntu Linux(X86, X86-64), Fedora, CentOS, Red Hat. FreyrSCADA IEC 60870-5-104 Linux SDK contains Shared Library(.a) (precompiled library), Static link lib, Demo IEC104 Server & Client programs, CodeBlock Demo console project files, Doxygen . Get free Evaluation Kit - IEC 60870-5-104 Development Bundle In the Development Bundle, We included IEC 60870-5-104 Server & Client Simulator, Windows & Linux SDK. http://www.freyrscada.com/iec-60870-5-104.php video tutorials: https://www.youtube.com/playlist?list=PL4tVfIsUhy1bx7TVjtZnqFB6tbZBhOlJP -
24
Argos Scada English
An English translation of Argos Scada
When searching for open source SCADA I found Argos Scada. Unfortunately it is in Spanish and I only speak English. So this is an attempt to translate the Argos Scada documentation into English. See the Wiki. -
25
CANopen for LabVIEW
LabVIEW CANopen client library
A collection of VIs for easier interface with basic CANopen client operations such as SDO download, SDO upload and PDO messages. Helper VIs for arbitrary mapping of dictionary objects to specific PDOs are also implemented. The project includes a quite crude implementation of the DSP 402 profile for handling motor drives in velocity and/or in position mode.
